Video for Firefly RC Helicopter

Shop for Firefly RC Helicopter

AC Adapter for BladeRunner Series, Micro Mosquito & Firefly Indoor RC Helicopters

View This Product at Amazon

This is a replacement 120V AC Wall adapter for charging BladeRunner series rc helicopters like the Bladerunner I, II, III, Firefly and Micro Mosquito. The charge end of this Bladerunner wall adapter hooks directly into the helicopter's transmitter (Bladerunner I, FireFly I) or charge base (most other models) then attach the transmitter or charge base to your helicopter as usual. Attention Micro Mosquito and Bladerunner Mini Search & Rescue owners: This AC wall adapter can be used to charge a Bladerunner, Bladerunner Mini, FireFLy or Micro Mosquito RC helicopter by plugging this ac adapter into the charge station - landing pad/field charger. Save $ by not needing all those C batteries! Bladerunner Series RC Helicopter AC Adapter Specifications: * Input: 120V AC * Output: 6V DC 500mA * Requires Bladerunner Transmitter SKU: BR-TX (sold separately) if charging a Bladerunner I * Requires Micro Mosquito landing pad/charge station SKU: BR-MM-BASE (sold separately) if charging a Bladerunner Mini, Micro Mosquito or Firefly

Interactive Toy Firefly R/C Radio Controlled Helicopter

View This Product at Amazon

There's nothing like it! The two-channel Firefly is the world's smallest, lightest, most stable indoor helicopter, with a range of up to 40 feet. Don't be fooled by its size - this high-tech miniature chopper packs a big punch and is sure to catch the eye of any onlooker. With full digital proportional steering, it will amaze you with its maneuverability as it flies up, down, left, right, forward and reverse, for up to 10 minutes per charge.

The Firefly's open-structure design lets observers see the inner-workings of this amazing toy. The Firefly is ready to take flight as soon as it's out of the box. Includes R/C transmitter, flight battery, charger and instructions. Two frequencies available. Requires one 9V battery for transmitter (not included). UL listed. Colors may vary from image shown.

2 Red Main Rotor Sets (2 Upper + 2 Lower Rotor Blades) For FireFly & Micro Mosquito RC Helicopters

View This Product at Amazon

You will receive 2 complete rotor sets. Description per rotor set: Upper and Lower replacement red and black rotor blades that fit both the Firefly and Micro Mosquito remote control helicopters made by Interactive Toy Concepts. It is good to keep a spare set of rotors on hand as a backup so you can keep flying, even after a bad crash. Technical Data Per Rotor Set: * 1 Upper and 1 Lower rotor * Diameter: 6.375" (162mm) * Weight: 0.21oz (6g) * Material: Plastic and Carbon Fiber * These rotor blades will only fit Micro Mosquito and Firefly RC Helicopters Micro Mosquito and Firefly Rotor Blade Replacement Instructions: 1. The rotors are held in place by a short rubber tube at the top of the main drive shaft. Pull gently to remove this tube 2. Slide both rotors up and off, along with the plastic spacer that keeps the two rotors separated 3. When replacing the rotors, first slide on the lower rotor (the one with the notched shaft on the bottom) 4. Next, slide the plastic spacer shaft over the rotor shaft 5. Now slide on the upper rotor. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order to slide into place. This should not require any force to do when the parts are correctly oriented. 6. Lastly, reattach the rubber tube These rotor blades will only fit Micro Mosquito and Firefly RC Helicopters. These will NOT fit Bladerunner or Bladerunner Search and Rescue.

2 Firefly RC Helicopter Replacement Parts Kits: Rotor Sets, Spacers, C-Clips, Tail Fins + Ballasts

View This Product at Amazon

2 replacement parts kits for the Firefly RC helicopter made by Interactive Toy Concepts. Each kit includes a rotor set, two spacer sets, two c-clips, two foam ballasts, and a tail fin. The rotors fit the Firefly or Micro Mosquito. It is good to keep a spare set of rotors on hand as a backup so you can keep flying, even after a crash. Includes: Rotor Set, Two Spacer Sets, Two C-clips, Two Foam Ballasts, Tail Fin and Sticker. Technical Information: 1 Upper and 1 Lower rotor, Diameter: 6.375" (162mm), Weight: 0.21oz (6g), Material: Plastic and Carbon Fiber. These rotor blades will only fit Firefly and Micro Mosquito RC Helicopters. Rotor Blade Replacement Instructions: 1) The rotors are held in place by a short rubber tube at the top of the main drive shaft. Pull gently to remove this tube. 2) Slide both rotors up and off, along with the plastic spacer that keeps the two rotors separated. 3) When replacing the rotors, first slide on the lower rotor (the one with the notched shaft on the bottom). 4) Next, slide the plastic spacer shaft over the rotor shaft. 5) Now slide on the upper rotor. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order to slide into place. This should not require any force to do when the parts are correctly oriented. 6) Lastly, reattach the rubber tube. NOTE: These rotor blades will NOT fit Bladerunner or Bladerunner Search and Rescue.

OEM Replacement Li Poly Battery for Micro Mosquito or Firefly RC Helicopters

View This Product at Amazon

This is an OEM (standard) replacement battery for the both the Micro Mosquito and Firefly mini RC helicopters. The single cell lithium polymer will restore flight times that may have been shorted by a worn-out battery. Note: Soldering is required for installation. Wires are pre-installed on the battery. * Voltage: 3.7 Volts LiPoly (1 cell) * Weight: 5g | 0.2 oz * Length: 32mm | 1 3/32" * Width: 20mm | 13/16" * Depth: 4.5mm | 5/32"